Chloroacetaldehyde


Chloroacetaldehyde is an organic compound with the formula ClCH2CHO. Like some related compounds, it is highly electrophilic reagent and a potentially dangerous alkylating agent. The compound is not normally encountered in the anhydrous form, but rather as the hemiacetal 2O.
Chloroacetaldehyde is a useful intermediate in the synthesis of 2-aminothiazole including the pharmaceuticals altizide, polythiazide, brotizolam and ciclotizolam. Another use is to facilitate bark removal from tree trunks.

Synthesis and reactions

Hydrated chloroacetaldehyde is produced by the chlorination of aqueous vinyl chloride:
It can also be prepared from vinyl acetate or by careful chlorination of acetaldehyde. The related bromoacetaldehyde is prepared via bromination of vinyl acetate. It also rapidly forms an acetals in the presence of alcohols.
Being bifunctional, chloroacetaldehyde is a versatile precursor to many heterocyclic compounds. It condenses with thiourea derivatives to give aminothiazoles. This reaction was important as a precursor to sulfathiazole, one of the first sulfa drugs.

Anhydrous

Water free chloroacetaldehyde is prepared from the hydrate by azeotropic distillation with chloroform, toluene or carbon tetrachloride. Anhydrous chloroacetaldehyde reversibly converts to polyacetals. Less reactive chloroacetaldehyde derivatives might be used instead to obtain chloroacetaldehyde or bypass its intermediate formation completely: e.g. chloroacetaldehyde dimethyl acetal hydrolyzes in acidic conditions to give chloroacetaldehyde, which may then quickly react with the other reagents instead of polymerizing.

Hemihydrate

Hemihydrate is formed as below. It has a melting point of 43–50°C, boiling point of 85.5 °C.

Environmental aspects

Chloroacetaldehyde is a metabolite in the degradation of 1,2-dichloroethane, which initially converts to chloroethanol. This metabolic pathway is topical because 1,2-dichloroethane is produced on a large as a precursor to vinyl chloride.

Safety

Chloroacetaldehyde is corrosive to mucous membranes. It irritates eyes, skin and respiratory tract.
Based on data collected from human studies in 1962, exposures to 45 ppm of chloroacetaldehyde were found to be disagreeable and caused conjunctival irritation to the subjects. The Occupational Safety and Health Administration established a permissible exposure limit at a ceiling of 1 ppm for exposures to chloroacetaldehyde.