Audio Video Bridging


Audio Video Bridging is a common name for the set of technical standards which provide improved synchronization, low-latency, and reliability for switched Ethernet networks. AVB embodies the following technologies and standards:
IEEE 802.1Qat and 802.1Qav amendments have been incorporated to the base IEEE 802.1Q-2011 document, which specifies the operation of Media Access Control Bridges and Virtual Bridged Local Area Networks.
AVB was initially developed by the Institute of Electrical and Electronics Engineers Audio Video Bridging task group of the IEEE 802.1 standards committee. In November 2012, Audio Video Bridging task group was renamed to Time-Sensitive Networking task group to reflect the expanded scope of its work, which is to "provide the specifications that will allow time-synchronized low latency streaming services through IEEE 802 networks". Further standardization efforts are ongoing in IEEE 802.1 TSN task group.
To help ensure interoperability between devices that implement the AVB and TSN standards, the AVnu Alliance develops device certification for the automotive, consumer, and professional audio and video markets.

Background

Analog audio video equipment historically used one-way, single-purpose, point-to-point connections. Even digital AV standards, such as S/PDIF for audio and the serial digital interface for video, retain these properties. This connection model results in large confusing masses of cables, especially in professional applications and high-end audio.
Attempts to solve these problems were based on multi-point network topologies, such as IEEE 1394, and included adaptation of standard switched computer network technologies such as Audio over Ethernet and Audio over IP. Unfortunately professional, home, and automotive AV solutions came to use specialized protocols that do not interoperate between each other or standard IT protocols, while standard computer networks did not provide tight quality of service with strict timing and predictable or bounded latency.
To overcome these limitations, Audio Video Bridging networks transmit multiple audiovisual streams through standard Ethernet switches connected in a hierarchical tree topology. AVB includes layer 2 protocols to reserve connection bandwidth and prioritise network traffic, which guarantee precise sync clock and low transmission latency for each stream.
Tight sync between multiple AV streams is needed for lip sync between video and related audio streams, to keep multiple digitally connected speakers in phase in a professional environment, and to prevent audio or video packets from arriving late to the endpoint, resulting in a dropped frame of video and unwanted audio glitches such as a pop or silence. Worst-case delay, including source and destination buffering, is required to be low and deterministic: the user-interface delay shall be around 50 ms, so that the pressing of a button and the resulting action are perceived as happening instantly, and 2 ms for live performance or studio work.

Summary

Audio Video Bridging is implemented as a switched Ethernet network which works by reserving a fraction of the available Ethernet for AV traffic. There are three primary differences introduced by the AVB architecture:
The IEEE 802.1BA is an umbrella standard for these three principal technologies, which defines application-specific configurations and operation procedures for devices in switched audio video networks.
The new Layer-2 configuration protocols work with backwards-compatible extensions to the Ethernet 802.1 frame format; such minimal changes allows AVB devices to coexist and communicate in standard IT networks, however, only AVB-capable switches and endpoint can reserve network resources with admission control and synchronize local time to a master clock, which is required for low latency time-sensitive traffic.
AVB traffic is replicated in a multicast manner, with one talker and multiple listeners. AVB packets are sent at regular intervals in the allocated time slots, preventing collisions for AV traffic.
AVB guarantees a latency of 2 ms for Class A traffic and 50 ms for Class B traffic over a maximum of 7 hops, with a transmission period of 125 μs for Class A and 250 μs for Class B traffic.
An IEEE 802.1AS network timing domain includes all devices that communicate using the gPTP protocol. The grandmaster is a device chosen as the reference clock; the 802.1BA specification requires every talker and network bridge to be grandmaster capable.
802.3 link management and 802.1AS link delay measurement protocols calculate the round-trip delay to the AVB endpoint; this needs to be better than worst-case wire delay from the 802.1AS peer delay algorithm.
Higher-level protocols may use 802.1AS clock information to set the exact presentation time for each AV stream.

AV transport and configuration

IEEE 1722 AVTP

IEEE Std 1722-2011 for a Layer 2 Audio Video Transport Protocol defines details for transmitting IEEE 1394/IEC 61883 streams and other AV formats, setting the presentation time for each AV stream, and manage latencies from worst case delay calculated by the gPTP protocol.

IEEE 1722.1 AVDECC

IEEE Std 1722.1-2013 is a standard which allows AVB Discovery, Enumeration, Connection management and Control of devices using IEEE Std 1722-2011. AVDECC defines operations to discover device addition and removal, retrieve device entity model, connect and disconnect streams, manage device and connection status, and remote control devices.

Interoperability

Higher layer services can improve synchronisation and latency of media transmission by mapping the AVB Stream ID to internal stream identifiers to and basing internal timestamps on gPTP master clock.

IEEE 1733

IEEE Std 1733-2011 defines a Layer 3 protocol profile for Real-time Transport Protocol applications with a RTCP payload format, which assigns the Stream ID from SRP to the RTP's Synchronization source identifier, and correlates RTP timestamps for presentation time with 802.1AS gPTP master clock.

AES67

is based on standard RTP over UDP/IP and IEEE 1588 Precision Time Protocol for timing; interoperability with AVB/TSN can be achieved by linking IEEE 802.1AS timing information to AES67 PTPv2 payload data.
AES67 implementation with AVB interoperability has been demoed at InfoComm 2016.

Milan

In 2018, the Avnu Alliance announced the Milan initiative to promote interoperability of AVB devices and provide product certification and testing.
The specification requires media clocking based on the AVTP CRF and sample rate of 48 kHz ; audio stream format is based on AVTP IEC 61883-6 32-bit Standard AAF Audio Format with 8 channels per stream. Redundancy is provided with two independent logical networks for every endpoint and a seamless switchover mechanism.

DetNet

The IETF Deterministic Networking Working Group is working to define deterministic data paths with bounds on latency, loss, and packet delay variation, and high reliability. DetNet shall operate over both Layer 2 bridged segments and Layer 3 routed segments, relying on interoperability with AVB/TSN switches when possible.
One of the possible application of DetNet is professional audio/video, such as music and film production, broadcast, cinema, live sound, and large venue systems for public addressing, media streaming and emergency announcement. The stated goal is to enable geographically distributed, campus/enterprise-wide Intranet for content delivery with bounded low latency. A single network shall handle both A/V and IT traffic, with Layer 3 routing on top of AVB QoS networks to enable sharing content between Layer 2 AVB segments, and provide IntServ and DiffServ integration with AVB where possible. Unused reserved bandwidth shall be released for best-effort traffic. The protocol stack shall have Plug-and-play capabilities from top to bottom to reduce manual setup and administration, allow quick changes of network devices and network topology.
Large-scale AVB networks, like those employed by ESPN SportsCenter "Digital Center 2" broadcast facility which hosts multiple individual studios, are laid with a thousand miles of fiber and have ten Tbps of bandwidth for a hundred thousand signals transmitted simultaneously; in the absence of standards-based solution to interconnect individual AVB segments, a custom Software-Defined Networking router is required.

Standardization

The work on A/V streaming started at the IEEE 802.3re 'Residential Ethernet' study group in July 2004. In November 2005, it was moved to the IEEE 802.1 committee responsible for cross-network bridging standards.