The Alfa Romeo BAT is an Italian concept car. The car originated from a joint collaboration project between Alfa Romeo and the Italian design house Bertone that began in 1953. Three cars were built: the BAT 5 in 1953, the BAT 7 in 1954, and finally the BAT 9 in 1955. All three cars were designed by Franco Scaglione.
History
Alfa Romeo contacted Giuseppe "Nuccio" Bertone of the Bertone design house and commissioned three concept vehicles to research the effects of drag on a vehicle. The idea was to create vehicles with the lowest possible drag coefficient. The cars were named BAT for "Berlinetta Aerodinamica Tecnica." All the cars featured large rear bumpers and curved fins. They were built upon the Alfa Romeo 1900 chassis. Each of the three cars was presented at the Turin Auto Show, in 1953, 1954 and 1955 respectively. The lowest of the three cars' drag coefficient was 0,19, an achievement even by today's standards. For each of the cars, Alfa Romeo provided a five-speed gearbox and a powerful four-cylinder engine that produced more than, good enough to propel the car to a top speed of. All three original BATs have been restored. They make appearances at car shows such as the Concorso Italiano and Pebble Beach Concours d'Elegance. The cars have been on display at the Blackhawk Museum in Danville, CA, from 2005 until July 2017.
BAT 5
The BAT 5 was the first of the Bertone-Alfa Romeo BAT project. It was first shown at the Turin Auto Show in 1953. The design of the model was based on a study of aerodynamics. The shape of the front in fact aims to eliminate the problem of airflow disruption at high speeds. The design also aims to do away with any extra resistance generated by the wheels turning, as well as achieving a structure which would create the fewest possible air vortices. In practice these rigorous criteria would allow the car to reach with the engine mounted as standard. The design that Bertone came up with was for an extremely light car, with side windows at a 45 degree angle with respect to the body of the car and a large windscreen which blends in with the almost flat roof. The tail has a length-ways rear windscreen divided by a slim pillar, and two fins tapering upwards and slightly inwards. The car had a drag coefficient of 0,23.
BAT 7
The second BAT was shown at the Turin Auto Show in 1954, a year after the BAT 5. For this design, Bertone added elements from his experience working on wing profiles in the aeronautical industry. The result was the shape of the large, curved tail fins. The nose was lower than that of the BAT 5, and the protrusions where the headlights would normally be stuck out even further. The headlights were located next to the nose and moved down when in use. The drag coefficient of the BAT 7 is 0,19. The BAT 7 features in the Top Gear book Daft Cars by Matt Master.
BAT 9
The third BAT was shown at the Turin Auto Show of 1955, the BAT 9. It was made to look more like the then current Alfa Romeo models than the other BATs. The BAT 9 did away with the marked wing lines of the previous models in favour of a cleaner, more sober line. The tail fins, which in the other two models had a real wing-like look, were sized down into two small metal plates, much like the tail fins in production on American and some European cars of the time.
BAT 11
After more than 50 years, Alfa Romeo and Bertone showed a new BAT concept in 2008. The BAT 11 made its début in Geneva, at the time of the 2008 Geneva Motor Show, though not at the show itself. The new BAT 11, based on the Alfa Romeo 8C Competizione, shares many styling cues with the classic BAT cars of the 1950s.
