Airbus RACER


The Airbus RACER is an experimental high-speed compound helicopter developed by Airbus Helicopters from the Eurocopter X³.
Revealed at the June 2017 Paris air show, final assembly will start in mid-2020 for a 2021 first flight.
Cruising up to, it aims for a 25% cost reduction per distance over a conventional helicopter.

Development

On 20 June 2017 at the Paris air show, Airbus Helicopters revealed a high-speed demonstrator configuration based on the X3
developed within the Clean Sky 2 research programme.
Its aerodynamic configuration was validated in 2017.
In February 2018, the Safran Aneto-1X was preferred over the RTM322 initially selected, it is 25% more compact for the same power.
By October 2018, design of key subsystems was completed before the first components started manufacturing with long-lead items, as the lateral drive shaft production began.
GE's Avio Aero in Italy launched procurement and manufacturing of the lateral gear boxes housings, GE Aviation Systems in UK is building the wing’s titanium cradle, INCAS/Romaero in Romania started manufacturing the composite side panel and Aernnova in Spain the tail parts primary structure.
The flight demonstration
should open the flight envelope and assess performance, before demonstrating missions like EMS, SAR and private transport, maturing low-noise flight procedures.
Final assembly should start by mid-2020 for a 2021 first flight.

Design

Optimised for a cruise over, 50% faster than a conventional helicopter, it will consume 15% less fuel per distance at than a helicopter at, and aim for a 25% cost reduction per distance.
The lateral pusher propellers generate thrust and are isolated from passengers during ground operations by the box wings which serve to generate lift at cruise velocity. This allows the main rotor to be slowed by up to 15% as the craft's air speed increases and prevents the rotor blades breaking the sound barrier which would reduce performance.
Driven by two engines, of which one is capable of shutting down and restarting once inflight to save fuel and increase range, it will have a low weight and low maintenance hybrid metallic-composite airframe and lower weight high voltage direct current electrical generation.