8×64mm S
The 8×64mm S is a rimless bottlenecked centerfire cartridge developed as a military service round for the German Army who never issued it. As is customary in European cartridges the 8 denotes the 8 mm bullet caliber and the 64 denotes the 64 mm case length.
The 8×64mm is a hunting cartridge in central Europe and can due to its maximal overall length fairly easily be chambered in standard sized military Mauser Gewehr 98 bolt action rifles. In such military M98 bolt actions the magazine boxes, however, have to be adapted by a competent gunsmith to function properly with the 8×64mm S cartridge, since the M98 internal magazine boxes feature an internal magazine length of.
History
At the start of the 20th century the famous German gun and ammunition designer Wilhelm Brenneke was experimenting with the engineering concept of lengthening and other dimensional changes regarding standard cartridge cases like the M/88 cartridge case, then used by the German military in their Mauser 98 rifles, to obtain extra muzzle velocity.In 1912 Brenneke designed the 8×64mm S cartridge de novo. This cartridge is an example of a de novo rifle cartridge intended as a ballistic upgrade option for the Mauser Gewehr 98 rifles that were then standard issue in the German military. The external cartridge case dimensions like overall length and slightly larger case head diameter compared to the German 8×57mm IS military cartridge coupled with a moderate increase in maximum pressure were chosen with easy conversion of Gewehr 98 rifles for the 8×64mm S in mind. Brenneke hoped that he could achieve a major success with this round designed in an age when military doctrine expected rifle shots at ranges up to 800 to 1000 m. The German military chose however to stick to their 8×57mm IS rifle cartridge avoiding rechambering their service rifles for a larger and heavier cartridge that due to its more favourable case volume to bore area ratio made it ballistically superior to the 8x57mm.
Commercially the 8×64mm S was after an initial success phase in the period between the World Wars rather unsuccessful. Brenneke's engineering concept to lengthen the 57 mm long M/88 cartridge case to create new for those days very powerful cartridges was essentially sound and he persisted in the development of new cartridges like the commercially successful 7×64mm along this line.
The 8×64mm S offered compared to the 8×57mm IS about 2 to 5% extra muzzle velocity. This results in a flatter trajectory and better performance at longer range.
Beside the 8×64mm S rifle cartridge Brenneke also designed a rimmed version for break action rifles of the cartridge. The rimmed 8×65mmR S variant of the cartridge was also rather commercially unsuccessful.
8×64mm
This cartridge also exists in an 8×64mm variant intended for a different bullet diameter. Rifles chambered for the 8×64mm sport the earlier tighter 8.07 mm I-bore as found in the 8×57mm I.To avoid potentially serious accidents, it is important to distinguish clearly between cartridges loaded for these two different bullet diameters, and only fire them in appropriately chambered/barrelled rifles.
Rimmed variants
In 1914 Brenneke introduced rimmed variants for break action rifles of the 8×64mm S and 8×64mm rimless variants. These rimmed variants are known as the 8×65mmRS and 8×65mmR.Cartridge dimensions
The 8×64mm S has 4.51 ml H2O cartridge case capacity. A sign of the era in which the 8×64mm S was developed are the gently sloped shoulders. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles, under extreme conditions.8×64mm S maximum C.I.P. cartridge dimensions. All sizes in millimeters.
Americans would define the shoulder angle at alpha/2 ≈ 14 degrees. The common rifling twist rate for this cartridge is 240 mm, 4 grooves, Ø lands = 7.89 mm, Ø grooves = 8.20 mm, land width = 4.40 mm and the primer type is large rifle or large rifle magnum depending on the load.
According to the official C.I.P. rulings the 8×64mm S can handle up to Pmax piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.
This means that 8×64mm S chambered arms in C.I.P. regulated countries are currently proof tested at PE piezo pressure.
The American 8mm-06 wildcat cartridge is probably the closest ballistic twin of the 8×64mm S. This is a necked up.30-06 Springfield wildcat made to accept 8 mm bullets. This modification was performed to German Mauser 98 rifles in the US to facilitate the use of a commonly available cartridge case in the US, since the German 8×57mm IS cartridge was not readily available in the US when troops brought German Mauser service rifles home as war souvenirs after World War II.
Contemporary use
The 8×64mm S is offered as a chambering option in some European hunting rifle manufacturer's products palette. The 8×64mm S performance lies between the commercially important 8×57mm IS standard cartridge and the 8×68mm S magnum cartridge making it suitable for hunting all kinds of European game. In the year 2001 the Brenneke Company tried to revive the 8×64mm S cartridge by offering it loaded with 12.8 gram Brenneke Torpedo Ideal Geschoß hunting bullets. Sellier & Bellot and Brenneke are currently the only ammunition manufacturers offering 8×64mm S factory loads.Loaded with short light bullets it can be used on small European game like roe deer and chamois. Loaded with long heavy bullets it can be used on big European game like boar, red deer, moose and brown bear. The 8×64mm S offers very good penetrating ability due to a fast twist rate that enables it to fire long, heavy bullets with a high sectional density.
The 8×64mm S can be used in countries which ban civil use of former or current military ammunition. In France where the possession of rifles in their original military caliber is tightly regulated cartridges like the 8×64mm S allow French licensed gun owners to possess rifles based on the Mauser Gewehr 98 system under the less constraining "hunting rifle" category. The also rare 8×60mm S cartridge offers a comparable rechambering option for Mauser Gewehr 98 and Karabiner 98k based hunting rifles sporting 8 mm S-bores. Due to its larger case capacity the 8×64mm S chambering offers better ballistic performance than the 8×60mm S.
The 8×64mm S rimmed sister cartridge, the 8×65mm RS, is also not popular in central Europe for the same reasons as the 8×64mm S.
8 mm cartridges compared
Maximum muzzle velocity comparison in % of the probably most proliferated European and American 8 mm rifle cartridges out of 650 mm long barrels loaded with relatively light to heavy 8 mm bullets to their C.I.P. or SAAMI sanctioned maximum pressures.| Bullet weight gram | 8.23 g | 9.72 g | 11.34 g | 12.96 g | 14.26 g | Case capacity |
| 8×57mm IS | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 | 100.0 |
| 8×64mm S | 102.7 | 102.7 | 102.8 | 102.9 | 102.9 | 110.3 |
| .325 WSM | 108.7 | 109.1 | 109.0 | 109.3 | 111.1 | 131.7 |
| 8×68mm S | 108.4 | 108.5 | 108.7 | 110.5 | 112.3 | 136.5 |
| 8 mm Rem. Mag. | 111.9 | 112.3 | 114.5 | 115.3 | 116.0 | 157.1 |
This comparison is not totally objective since the 8mm Remington Magnum operates at 460 MPa, the.325 Winchester Short Magnum at 435 MPa, the 8×68mm S at 440 MPa, the 8×64mm S at 405 MPa and the 7.92×57mm Mauser at 390 MPa maximum chamber piezo pressure. Higher chamber pressure results in higher muzzle velocities.