5 cm FlaK 41


The 5 cm FlaK 41 was a German anti-aircraft gun produced for defending the intermediate zone above the range of light guns, but below the ceiling of the heavy pieces. The gun proved inadequate and was produced only in small numbers.

Development

Development of the gun was slow: it began in 1936, but the contract was awarded to Rheinmetall-Borsig only in 1940. The gun was produced in two models, one mounted on a two-axle trailer, the other one stationary and used for defending important industrial installations. Neither was a success, and they shared the same faults. The speed of traverse was too slow for fast-moving targets and the gun proved underpowered, even though the propellant gave a blast powerful enough to dazzle the aimer in broad daylight. The relatively heavy cartridge was cumbersome and heavy when loaded in 5-round clips.
The gun was automatic, gas-operated, and locked by the breech block dropping down, which engaged the buttress guides on the block against the guides on the jacket. The recoil of the breech operated the feed mechanism. The buffer was mounted centrally in the cradle, between the two springs of the recuperator.
Altogether 60 examples of the 5 cm Flak 41 were produced, starting from 1941, with only 24 of them still in use in 1945.
Later German attempts to create a medium anti-aircraft gun focused on weapons and the 5 cm Pak 38-derived Gerät 241.